You might not need to write a driver if: Your device belongs to a USB device class that is supported by Microsoft. In that case, the corresponding class driver is loaded as the device driver. For a list of device classes for which Windows includes an inbox driver, see USB device class drivers included in Windows. 1.8V Adapter 24/25 Series USB Programmer SOIC8 Clip EEPROM BIOS Writer CH341A US. NEW USB JTAG Programmer for XILINX and LATTICE CPLD Devices (SVF and XSVF) $29.99. Arduino Micro 5V USB Microcontroller. Hi & Welcome to my Channel:)! CHECK DESCRIPTION!Here i Show you how to use a USB Bios Chip Programmer and a lot more.All the Files you can Download here.
In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.
Download the UsbAsp drivers from this link and follow the below steps.
In case your are using Windows7/Vista/Xp, skip the first 7 steps and directly jump to step8.
Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by following the below steps.
STEP 1:Go to Advanced Start Options by searching the same in Windows Start Menu.
STEP 2: Click on Restart Now in Advanced Start Up options.
STEP 3: Now choose the Troubleshoot option.
STEP 4: Click on Advanced Options.
STEP 5: Click on StartUp Settings.
STEP 6: Now Click on Restart and wait till the PC restarts.
STEP 7: Once the PC restarts, Press 7/F7 to disable Driver Signature Enforcement.
STEP 8: Now Connect the Usbasp programmer to the system and it will be listed under other devices in device manager.
STEP 9: Right Click and choose Update Driver Software
STEP 10:Now browse and select the folder where the drivers are stored.
STEP 11: After selecting the driver folder, click on Next to install the drivers.
STEP 12: Click on <b>Install This Software Anyway
STEP 13: Once the installion is successful, below message will be displayed.
Driver 89 Series Device Programmer Usb Programmer
STEP 14: Now the device will be listed under libusb-win32 devices.
- Xplore flash is based on various open source software, it requires avrdude. Avrdude is part of WinAVR GCC compiler. Download and install it.
- The GUI software will require .NET framework 2.0 or later please download and install it.
- Download and install XploreFlash GUI and follow the below steps.
STEP 1: Run the Xplore Flash(Avr Dudes) software and
- Select the UsbAsp programmer from the dropdown as shown below.
- Select the AT89S52 controller from the drop down.
- Check the write option to flash the .hex file to the controller.
STEP 2: Browse and Select the .hex file to be flashed.
STEP 3: Finally hit the GO button to flash the .hex file.
STEP 4: Flashing status will be displayed in the conosle window.
Have an opinion, suggestion , question or feedback about the article let it out here!
ISPnub - Stand-alone AVR programmer module
Like it? You can support via PayPal:
Universal Device Programmer
Features
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or smd components are needed.
- Programming speed is up to 5kBytes/sec.
- SCK option to support targets with low clock speed (< 1,5MHz).
Download
Firmware and circuit
The following packages include circuit and firmware.usbasp.2011-05-28.tar.gz (519 kB) TPI support, supports programmers with ATMega88 and ATMega8.
usbasp.2009-02-28.tar.gz (260 kB)
usbasp.2007-10-23.tar.gz (172 kB)
usbasp.2007-07-23.tar.gz (176 kB)
usbasp.2006-12-29.tar.gz (118 kB) Supports programmers with ATMega48 and ATMega8.
usbasp.2006-09-16.tar.gz (116 kB) New VID/PID!
usbasp.2005-11-14.tar.gz (175 kB)
usbasp.2005-07-03.tar.gz (166 kB)
usbasp.2005-04-21.tar.gz (169 kB)
Please refer to Readme.txt for details on building, installing and using USBasp.
Drivers
On Linux and MacOS X no kernel driver is needed. Windows requires a driver for USBasp. Please use this driver installation tool for Windows (see also: successful setup on Windows 10):Zadig - USB driver installation made easy
Software
- AVRDUDE supports USBasp since version 5.2.
- BASCOM-AVR supports USBasp since version 1.11.9.6.
- Khazama AVR Programmer is a Windows XP/Vista GUI application for USBasp and avrdude.
- eXtreme Burner - AVR is a Windows GUI Software for USBasp based USB AVR programmers.
Hardware
Schematic
Partlist
Partnumber | Value | Reichelt No |
---|---|---|
C1 | 4,7u | RAD 4,7/35 |
C2 | 100n | X7R-5 100N |
C3, C4 | 22p | KERKO 22P |
D1, D2 | 3V6 zener | ZF 3,6 |
CON1 | USB-B | USB BW |
CON2 | 10pol | WSL 10W |
IC1 | ATmega8-16 | ATMEGA 8-16 (not programmed!) |
JP1, JP2 | 2pol 2,54mm | SL 1X36G 2,54 |
LED1 | 3mm LED green | LED 3MM 2MA GN |
LED2 | 3mm LED red | LED 3MM 2MA RT |
Q1 | 12Mhz | 12,0000-HC49U-S |
R1, R2 | 68 | 1/4W 68 |
R3 | 2,2k | 1/4W 2,2k |
R4, R5, R6, R7 | 270 | 1/4W 270 |
R8 | 10k | 1/4W 10k |
R9, R10 | 1k | 1/4W 1k |
M1, M2 | Jumper | JUMPER 2,54GL SW |
M3 | Socket 28S | GS 28-S |
M4 | Case | TEKO 10007 |
M5 | PCB | - |
User PCB layouts
Here is a list of tested PCB layouts. If you have designed your own PCB, please let me know.usbasp_single_side.t3001.zip by Thomas Fischl Single-Side PCB, TARGET 3001! layout file Size: 90x40 mm (optimized for case Hammond 1591ATBU) | |
lv_usbasp.tar.gz by Pawel Szramowski (11/2007) With Low-voltage front-end. Single-Side PCB, EAGLE layout files, some SMD components | |
by Bernhard Walle Double-Side PCB, EAGLE layout files, part list with order numbers for Reichelt.de and Conrad.de Size: optimized for case Hammond 1591ATBU | |
http://thomaspfeifer.net/atmel_usb_programmer.htm by Thomas Pfeifer Single-Side PCB, PDF layout files, SMD components | |
by Tomasz Ostrowski Single-Side PCB, PDF and EPS layout files, only four 0805 SMD parts, rest discrete components | |
USBasp_CH.zip by Christian Heigemeyr Single-Side PCB, with some SMD 0805 components, PDF-files With additional buttons for reset and disconnection of the target | |
USBasp.sch, USBasp.pcb ComponentSide.pdf, TopSide.pdf, Schematics.pdf by Zhurov Pavel Single-Side PCB, P-CAD 2002 format and PDF files Crosspiece TXD and RXD are added for the ISP connector | |
usbasp_gr.rar by J.A. de Groot The board is single sided (EAGLE format), measures 3 by 8 cm and uses only regular components. | |
usbasb_mg.zip by Matthias Görner Single-Side PCB, eagle-format, with PS/PDF-files integrated sockets for target chips ATmega8 and ATmega32 | |
Tarball with layout by Hannes Östlund Doubleside-Side PCB, SMD components, very small | |
by Sergiy Bogdancev (01/2010) 3.3V version, ATMega48 only. Single-side PCB, ExpressPCB layout format + socket board for varies AVRs. Without future serial interface, chip initially must be programmed with another programmer. | |
Eaglefiles (sch/brd) and CAD case design (dxf) by Hans Hafner, HTL Mössingerstrasse-Klagenfurt, Österreich, hans.hafner (at) htl-klu (dot) at (01/2010) CNC-milled case (DXF file available), Eagle layout, only a few SMD parts | |
Different USBasp versions: Easy to built non-smd, smd version and a very small USBasp by Sven Hedin (01/2011) Eagle files available. | |
USB Key AVR Programmer by Fabio Baltieri (09/2011) Very small USB key like dimensions. SMD parts. | |
AVR ISP Programmer by Jaroslav Vadel (04/2012) Small programmer. SMD parts. | |
Target project and PDFs (layout/schematics) by Marius Schäfer (09/2013) | |
tinyUSBboard with USBasp-compatible firmware by Stephan Bärwolf (04/2014) | |
USBasp on breadboard with socket for controller daughter boards. by Fabian Hummel (11/2018) | |
Tjaart van Aswegen designed an SMD board: DIP TRACE and GERBER files. by Tjaart van Aswegen (09/2019) | |
Feature rich (e.g. different voltage levels, integrated USB to serial converter, USB-C connector) USBasp compatible design. AVR Programmer Github project. by Brian Pepin (12/2019) | |
USBasp with ZIF socket and through hole components. KiCad design on Github by Bruno (04/2020) | |
USBasp board with additional 6pin header and selectable target supply (3.3V/off/5.0V). by Marty E. (10/2020) | |
John included a 40 pin universal socket which takes 8, 14, 20 and 28 pin devices. He also added a versatile crystal oscillator with outputs of 1, 2, 4, 8 and 16 Mhz to clock the chips. There is also the standard 6pin ICSP connector and a user led connected to the MOSI pin. by John P. (11/2020) |
Links
http://www.obdev.at/products/avrusb/ Firmware-only AVR USB driverDriver 89 Series Device Programmer Usb 3.0
http://libusb.sourceforge.net/ libusbhttp://libusb-win32.sourceforge.net/ LibUsb-Win32
Driver 89 Series Device Programmer Usb Wireless Adapter
http://www.nongnu.org/avrdude/ AVRDUDE - AVR Downloader/UploaDEr